?2010-11 peregrine semiconductor corp. all rights reserved. page 1 of 5 document no. 70-0268-04 www.psemi.com table 1. ac and dc electrical specifications @ +25 c symbol characteristics test conditions min typ max units f typ operating frequency range 1 dc 1.0 ghz v ds drain-source voltage v gs = +3v, i ds = 40 ma 260 320 380 mv v ds match drain-source voltage match 12 40 mv v t threshold voltage v ds = 0.1v; per astm f617-00 -100 mv r ds drain-source ?on? resistance v gs = +3v, i ds = 40 ma 6.5 7.75 9.5 ? the pe4141 is an ultra-high linearity passive broadband quad mosfet array with high dynamic range performance capable of operation up to 1.0 ghz. this quad array operates with differential signals at all ports (rf, lo, if), allowing an analog multiplexer to be built that uses lo ports as digital controls, rf and if port as single-ended or differential inputs/outputs. the pe4141 switches the differential input to the differential output at the lo switching rate. packaged in an 8-lead msop package, the pe4141 is ideal for highly magnetic environments such as magnetic resonance imaging (mri). the pe4141 is manufactured on peregrine?s ultracmos? process, a patented variation of silicon-on-insulator (soi) technology on a sapphire substrate, offering the performance of gaas with the economy and integration of conventional cmos. product specification ultra-linear ultracmos? broadband quad mosfet array product description figure 1. functional diagram pe4141 features ?? ultimate quad mosfet array ?? very high linearity ?? low magnetic ?? ideal for mixer applications ?? up/down conversion ?? low conversion loss ?? high lo isolation ?? 8-lead msop package ideal for magnetic environments figure 2. package type 8-lead msop rf1 lo2 if1 lo1 rf2 if2 applications the pe4141 is ideally suited for broadband analog multiplexer design in: ?? medical instrumentation ?? magnetic resonance imaging (mri) ?? data acquisition and adc/dac muxing ?? rf modulation/demodulation ?? precision instrumentation ?? analog or digital video switch matrices note: 1. typical untested operating fre quency range of quad mosfet transistors. logo updated under non-rev change. peregrine products are protected under one or more of the following u.s. patents: http://patents.psemi.com
product specification pe4141 page 2 of 5 ?2010-11 peregrine semiconductor corp. all rights reserved. document no. 70-0268-04 ultracmos? rfic solutions table 2. pin descriptions table 3. absolute maximum ratings electrostatic discharge (esd) precautions this mosfet device has minimally protected inputs and is highly susceptible to esd damage. when handling this ultracmos? device, observe the same precautions that you would use with other esd-sensitive devices. latch-up avoidance unlike conventional cmos devices, ultracmos? devices are immune to latch-up. figure 3. pin configuration (top view) exceeding absolute maximum ratings may cause permanent damage. operation should be restricted to the limits in the operating ranges table. operation between operating range maximum and absolute maximum for extended periods may reduce reliability. symbol parameters/ conditions min max units t st storage temperature range -65 150 c t op operating temperature range 0 70 c v dc + ac maximum dc plus peak ac voltage across drain- source 3.3 v v dc+ac maximum dc plus peak ac voltage across gate- drain or gate-source 4.2 v v esd esd sensitive device 100 v marking packaged devices are marked with part number ?4141?, date code and lot code. pin no. pin name description 1 if1 if output connection (drain) 2 gnd ground 3 rf1 rf input connection (source) 4 rf2 rf input connection (source) 5 lo2 lo input connection (gate) 6 lo1 lo input connection (gate) 7 gnd ground 8 if2 if output connection (drain) device description the performance level of this mosfet array is made possible by the very high linearity afforded by peregrine?s ultracmos? process. the 8-lead msop package is suitable for highly magnetic applications including magnetic resonance imaging (mri.) the pe4141 is an ideal mosfet array core for a wide range of mosfet array products, including module level solutions that incorporate baluns or other single-ended matching structures enabling three-port operation. logo updated under non-rev change. peregrine products are protected under one or more of the following u.s. patents: http://patents.psemi.com
?2010-11 peregrine semiconductor corp. all rights reserved. product specification pe4141 page 3 of 5 document no. 70-0268-04 www.psemi.com evaluation kit figure 4. evaluation board layout figure 5. evaluation board schematic peregrine specification 101-0157-00a peregrine specification 102-0512-01 lo/rf i f/lo rf/if see note 2 c1 l2 r2 8 r2 2 r3 3 2 1 j2 l1 r3 1 4 5 3 2 t3 r7 r1 1 r1 8 r3 1 r8 r1 0 c2 r2 6 1 2 j1 r5 r1 5 r2 r3 2 r6 1 2 j4 sma connector (side mnt short ) c3 1 4 5 3 2 t1 1 4 5 3 2 t2 1 2 j5 r2 4 r2 0 r2 3 r2 9 r1 3 l3 r3 0 1 2 j3 sma connect or (side mnt short) r1 7 r1 4 r1 6 r9 r2 5 r1 2 r1 9 r2 1 r4 r2 7 r1 1 2 j6 sma connect or (side mnt short) 1 if1 2 gnd 3 rf1 4 rf2 5 lo2 6 lo1 7 gnd 8 if2 u1 msop8 logo updated under non-rev change. peregrine products are protected under one or more of the following u.s. patents: http://patents.psemi.com
product specification pe4141 page 4 of 5 ?2010-11 peregrine semiconductor corp. all rights reserved. document no. 70-0268-04 ultracmos? rfic solutions 8-lead msop figure 6. package drawing logo updated under non-rev change. peregrine products are protected under one or more of the following u.s. patents: http://patents.psemi.com
?2010-11 peregrine semiconductor corp. all rights reserved. product specification pe4141 page 5 of 5 document no. 70-0268-04 www.psemi.com sales contact and information for sales and contact information please visit www.psemi.com . 8-lead msop table 5. ordering information order code part marking description package shipping method 4141-51 4141 pe4141g-08msop green 8-lead msop bulk or tape cut from reel 4141-52 4141 pe4141g-08msop-2000c green 8-lead msop 2000 units / t&r 4141-00 4141 pe4141-08msop-ek evaluation kit 1 / box dimension msop-8 ao 5.30 0.1 bo 3.40 0.1 ko 1.40 0.1 f 5.50 0.05 w 12 0.3 p 1 8 0.1 table 4. dimensions figure 7. tape and reel specification advance information : the product is in a formative or design stage. the datasheet contains design target specifications for product developm ent. specifications and features may change in any manner without notice. preliminary specification: the datasheet contains preliminary data. additional data may be added at a later date. peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. product specification: the datasheet contains final data. in the event peregrine decides to change the specifications, peregrine will notify cu stomers of the intended changes by issuing a cnf (customer notification form). the information in this datasheet is believed to be reliable. however, peregrine assumes no liability for the use of this information. use shall be entirely at the user?s own risk. no patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. peregrine?s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the peregrine product could create a situation in which personal injury or death might occur. peregrine assumes no liability for damages, includi ng consequential or incidental damages, arising out of the use of its products in such applications. the peregrine name, logo and utsi are register ed trademarks and ultracmos, harp, multiswitch and dune are trademarks of peregrine semiconductor corp. logo updated under non-rev change. peregrine products are protected under one or more of the following u.s. patents: http://patents.psemi.com
|
